V-6B

Possible for changing program and developing inline easily by adopting commercially available sequencer
Possible for setting the zone of temperature for processing
Prevent the occurrence of defective by sounding the alarm and stopping
the machine in case of exceeding the range of heater plate temperature
Easy foil setting
—– one touch operation without any tools, cantilever type foil feeding unit
No trouble of by unremoving drain by adopting auto drain system

	V-6B
1. Stamping unit
① Stamping system	Pneumatic dou
② Stamping pressure	59 kN (6,000kgf)
③ Depth from the hot plate center	250
④ Stamping time control	0.00 ~ 9
⑤ Table dimension	(W) 385 mm (D) 350 mm
2. Hot plate unit
⑦ Hot plate dimension	(W) 280 mm (D) 180 mm
⑧ Hot plate stroke	60
⑨ Heater	Cartridge heater, 3 pcs., 0.73 kW
⑩ Temperature control	Room tempera
⑪ Distance from table to the hot plate	0 ~ 200 mm
3. Foil feeder unit
⑫ Foil feed system	Inverter mot transverse 1 stage
⑩ Foil feed speed	0 ~ 200 mm /
⑪ Foil feed rate control	Feed length adjustment by tim
⑫ Foil feed delay time control	0.00 ~ 99
⑬ Max. foil width	180 mm
4. Power supply	3-phase 200V 50/60Hz 1.15KW
5. Air source (@0.6MPa air pressure )	12Nl / cycle
6. Machine dimensions	(W) 825mm (D) 1,035mm (H) 1,510mm
7. Weight	approx. 450 kg