V-10B

Possible for changing program and developing inline easily by adopting commercially available sequencer
Possible for setting the zone of temperature for processing
Prevent the occurrence of defective by sounding the alarm and stopping
the machine in case of exceeding the range of heater plate temperature
Easy foil setting
—– one touch operation without any tools, cantilever type foil feeding unit
No trouble of by unremoving drain by adopting auto drain system

	V-10B
1. Stamping unit
① Stamping system	ble toggle type
② Stamping pressure	98kN (10,000kgf)
③ Depth from the hot plate center	mm
④ Stamping time control	9.9 sec
⑤ Table dimension	(W) 460 mm (D) 400 mm
2. Hot plate unit
⑦ Hot plate dimension	(W) 350 mm (D) 250 mm
⑧ Hot plate stroke	mm
⑨ Heater	Cartridge heater, 6 pcs., 1.94 kW
⑩ Temperature control	ture ~ 260℃
⑪ Distance from table to the hot plate	0 ~ 400 mm
3. Foil feeder unit
⑫ Foil feed system	or – driven, with hot plate fixed
⑩ Foil feed speed	sec ( variable )
⑪ Foil feed rate control	er control to 0.00 ~ 99.99 sec
⑫ Foil feed delay time control	.99 sec
⑬ Max. foil width	250 mm
4. Power supply	3-phase 200V 50/60Hz 2.88 KW
5. Air source (@0.6MPa air pressure )	29Nl / cycle
6. Machine dimensions	(W) 890mm (D) 1,085mm (H) 1,700mm
7. Weight	approx. 800 kg